8  Regular Expressions

A regular expression … is a sequence of characters that define a search pattern. Usually such patterns are used by string searching algorithms for “find” or “find and replace” operations on strings, or for input validation. It is a technique developed in theoretical computer science and formal language theory. [From https://en.wikipedia.org/wiki/Regular_expression]

Regular expressions are composed of two types of characters:

The metacharacters allow for advanced pattern matching in finding regular expressions.

Main tasks in character matching:

  1. basic string operations
  2. pattern matching (regular expressions)
  3. sentiment analysis

Many of the ideas below are taken from Jenny Bryan’s STAT545 class.

8.1 R packages to make your life easier

  • stringr package A core package in the tidyverse. It is installed via install.packages("tidyverse") and also loaded via library(tidyverse). Of course, you can also install or load it individually.
    • Many of the main functions start with str_. Auto-complete is your friend.
    • Replacements for base functions re: string manipulation and regular expressions (see below).
    • Main advantages over base functions: greater consistency about inputs and outputs. Outputs are more ready for your next analytical task.
    • stringr cheat sheet
  • tidyr package Especially useful for functions that split one character vector into many and vice versa: separate(), unite(), extract().
  • Base functions: nchar(), strsplit(), substr(), paste(), paste0().
  • The glue package is fantastic for string interpolation. If stringr::str_interp() doesn’t get your job done, check out the glue package.

8.2 Tools for characterizing a regular expression

8.2.1 Escape sequences

There are some special characters in R that cannot be directly coded in a string. For example, let’s say you specify your pattern with single quotes and you want to find countries with the single quote '. You would have to “escape” the single quote in the pattern, by preceding it with \, so it is clear that it is not part of the string-specifying machinery.

There are other characters in R that require escaping, and this rule applies to all string functions in R, including regular expressions. See here for a complete list of R escape sequences.

  • \': single quote. You don’t need to escape single quote inside a double-quoted string, so we can also use " ' ".
  • \": double quote. Similarly, double quotes can be used inside a single-quoted string, i.e. ' " '.
  • \n: newline.
  • \r: carriage return.
  • \t: tab character.

Note: cat() and print() handle escape sequences differently, if you want to print a string out with the interpretation of the sequences above, use cat().

print("a\nb")
[1] "a\nb"
cat("a\nb")
a
b

8.2.2 Quantifiers

Quantifiers specify how many repetitions of the pattern.

  • *: matches at least 0 times.
  • +: matches at least 1 times.
  • ?: matches at most 1 times.
  • {n}: matches exactly n times.
  • {n,}: matches at least n times.
  • {n,m}: matches between n and m times.
strings <- c("a", "ab", "acb", "accb", "acccb", "accccb")
grep("ac*b", strings, value = TRUE)
[1] "ab"     "acb"    "accb"   "acccb"  "accccb"
grep("ac*b", strings, value = FALSE)
[1] 2 3 4 5 6
grep("ac+b", strings, value = TRUE)
[1] "acb"    "accb"   "acccb"  "accccb"
grep("ac?b", strings, value = TRUE)
[1] "ab"  "acb"
grep("ac{2}b", strings, value = TRUE)
[1] "accb"
grep("ac{2,}b", strings, value = TRUE)
[1] "accb"   "acccb"  "accccb"
grep("ac{2,3}b", strings, value = TRUE)
[1] "accb"  "acccb"

8.2.3 Position of pattern within the string

  • ^: matches the start of the string.
  • $: matches the end of the string.
  • \b: matches the boundary of a word. Don’t confuse it with ^ $ which marks the edge of a string.
  • \B: matches the empty string provided it is not at an edge of a word.
strings <- c("abcd", "cdab", "cabd", "c abd")
grep("ab", strings, value = TRUE)
[1] "abcd"  "cdab"  "cabd"  "c abd"
grep("^ab", strings, value = TRUE)
[1] "abcd"
grep("ab$", strings, value = TRUE)
[1] "cdab"
grep("\\bab", strings, value = TRUE)
[1] "abcd"  "c abd"

8.2.4 Operators

  • .: matches any single character, as shown in the first example.
  • [...]: a character list, matches any one of the characters inside the square brackets. We can also use - inside the brackets to specify a range of characters.
  • [^...]: an inverted character list, similar to [...], but matches any characters except those inside the square brackets.
  • \: suppress the special meaning of metacharacters in regular expression, i.e. $ * + . ? [ ] ^ { } | ( ) \, similar to its usage in escape sequences. Since \ itself needs to be escaped in R, we need to escape these metacharacters with double backslash like \\$.
  • |: an “or” operator, matches patterns on either side of the |.
  • (...): grouping in regular expressions. This allows you to retrieve the bits that matched various parts of your regular expression so you can alter them or use them for building up a new string. Each group can than be refer using \\N, with N being the No. of (...) used. This is called backreference.
strings <- c("^ab", "ab", "abc", "abd", "abe", "ab 12", "a|b")
grep("ab.", strings, value = TRUE)
[1] "abc"   "abd"   "abe"   "ab 12"
grep("ab[c-e]", strings, value = TRUE)
[1] "abc" "abd" "abe"
grep("ab[^c]", strings, value = TRUE)
[1] "abd"   "abe"   "ab 12"
grep("^ab", strings, value = TRUE)
[1] "ab"    "abc"   "abd"   "abe"   "ab 12"
grep("\\^ab", strings, value = TRUE)
[1] "^ab"
grep("abc|abd", strings, value = TRUE)
[1] "abc" "abd"
grep("a[b|c]", strings, value = TRUE)
[1] "^ab"   "ab"    "abc"   "abd"   "abe"   "ab 12" "a|b"  
str_extract(strings, "a[b|c]")
[1] "ab" "ab" "ab" "ab" "ab" "ab" "a|"

8.2.5 Character classes

Character classes allow specifying entire classes of characters, such as numbers, letters, etc. There are two flavors of character classes, one uses [: and :] around a predefined name inside square brackets and the other uses \ and a special character. They are sometimes interchangeable.

  • (?i) before the string indicates that the match should be case insensitive.
  • [:digit:] or \d: digits, 0 1 2 3 4 5 6 7 8 9, equivalent to [0-9].
  • \D: non-digits, equivalent to [^0-9].
  • [:lower:]: lower-case letters, equivalent to [a-z].
  • [:upper:]: upper-case letters, equivalent to [A-Z].
  • [:alpha:]: alphabetic characters, equivalent to [[:lower:][:upper:]] or [A-z].
  • [:alnum:]: alphanumeric characters, equivalent to [[:alpha:][:digit:]] or [A-z0-9].
  • \w: word characters, equivalent to [[:alnum:]_] or [A-z0-9_] (letter, number, or underscore).
  • \W: not word, equivalent to [^A-z0-9_].
  • [:xdigit:]: hexadecimal digits (base 16), 0 1 2 3 4 5 6 7 8 9 A B C D E F a b c d e f, equivalent to [0-9A-Fa-f].
  • [:blank:]: blank characters, i.e. space and tab.
  • [:space:]: space characters: tab, newline, vertical tab, form feed, carriage return, space.
  • \s: space, . Matches any whitespace (space, tab, newline, and carriage return).
  • \S: not space.
  • [:punct:]: punctuation characters, ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [  ] ^ _ ` { | } ~.
  • [:graph:]: graphical (human readable) characters: equivalent to [[:alnum:][:punct:]].
  • [:print:]: printable characters, equivalent to [[:alnum:][:punct:]\\s].
  • [:cntrl:]: control characters, like \n or \r, [\x00-\x1F\x7F].

Note:
* [:...:] has to be used inside square brackets, e.g. [[:digit:]].
* \ itself is a special character that needs escape, e.g. \\d. Do not confuse these regular expressions with R escape sequences such as \t.

8.3 Examples to work through

I have found that the best way to truly understand regular expressions is to work through as many examples as possible (actually, maybe this is true about learning anything new!). For the following examples, try to figure out the solution on your own before looking at the footnote which contains the solution.

8.3.1 Case insenstive

  • Match only the word meter in “The cemetery is 1 meter from the stop sign.” Also match Meter in “The cemetery is 1 Meter from the stop sign.”
string <- c("The cemetery is 1 meter from the stop sign.", 
            "The cemetery is 1 Meter from the stop sign.")

str_extract(string, "(?i)\\bmeter\\b")
[1] "meter" "Meter"

8.3.2 Proper times and dates

  • Match dates like 01/15/24 and also like 01.15.24 and like 01-15-24.1
string <- c("01/15/24", "01.15.24", "01-15-24", "01 15 24", "011524", "January 15, 2024")

str_extract(string, "\\d\\d.\\d\\d.\\d\\d")
[1] "01/15/24" "01.15.24" "01-15-24" "01 15 24" NA         NA        
str_extract(string, "\\d\\d[/.\\-]\\d\\d[/.\\-]\\d\\d")
[1] "01/15/24" "01.15.24" "01-15-24" NA         NA         NA        
str_extract(string, "\\d{2}[/.\\-]\\d{2}[/.\\-]\\d{2}")
[1] "01/15/24" "01.15.24" "01-15-24" NA         NA         NA        
  • Match a time of day such as “9:17 am” or “12:30 pm”. Require that the time be a valid time (not “99:99 pm”). Assume no leading zeros (i.e., “09:17 am”).2
string <- c("9:17 am", "12:30 pm", "99:99 pm", "09:17 am")

str_extract(string, "(1[012]|[1-9]):[0-5][0-9] (am|pm)")
[1] "9:17 am"  "12:30 pm" NA         "9:17 am" 
str_extract(string, "^(1[012]|[1-9]):[0-5][0-9] (am|pm)$")
[1] "9:17 am"  "12:30 pm" NA         NA        

8.3.3 Alternation operator

The “or” operator, | has the lowest precedence and parentheses have the highest precedence, which means that parentheses get evaluated before “or”.

  • What is the difference between \bMary|Jane|Sue\b and \b(Mary|Jane|Sue)\b?3
string <- c("Mary", "Mar", "Janet", "jane", "Susan", "Sue")

str_extract(string, "\\bMary|Jane|Sue\\b")
[1] "Mary" NA     "Jane" NA     NA     "Sue" 
str_extract(string, "\\b(Mary|Jane|Sue)\\b")
[1] "Mary" NA     NA     NA     NA     "Sue" 

8.3.4 An example from my work

Below are a handful of string characters that represent genomic sequences which were measured in an RNA Sequencing dataset. The task below is to find intergenic regions (IGR) and identify which coding sequences (CDS) bookend the intergenic regions. Note that IGRs do not code for proteins while CDSs do. Additionally, AS refers to anti-sense which identifies the genomic sequence in the opposite orientation (e.g., CGGATCC vs CCTAGGC). [The code below was written by Madison Hobbs, Scripps ’19.]

The names of the genomic pieces
allCounts <- data.frame(Geneid = c("CDS:b2743:pcm:L-isoaspartate_protein_carboxylmethyltransferase_type_II:cds2705:-:626:NC_000913.3",
            "CDS:b2764:cysJ:sulfite_reductase2C_alpha_subunit2C_flavoprotein:cds2726:-:1799:NC_000913.3",
            "IGR:(CDS,b1594,mlc,glucosamine_anaerobic_growth_regulon_transcriptional_repressor3B_autorepressor,cds1581,-,1220/CDS,b1595,ynfL,LysR_family_putative_transcriptional_regulator,cds1582,-,893):+:945:NC_000913.3",
            "AS_IGR:(CDS,b0008,talB,transaldolase_B,cds7,+,953/CDS,b0009,mog,molybdochelatase_incorporating_molybdenum_into_molybdopterin,cds8,+,587):+:639:NC_000913.3",
            "IGR:(CDS,b1808,yoaA,putative_ATP-dependent_helicase2C_DinG_family,cds1798,-,1910/CDS,b1809,yoaB,putative_reactive_intermediate_deaminase,cds1799,+,344):+:396:NC_000913.3"))

allCounts$GeneidBackup = allCounts$Geneid

First, it is important to identify which are IGR, CDS, and anti-sense.

allCounts <- allCounts |> tidyr::separate(Geneid, c("feature", "rest"), sep="[:]")
allCounts
  feature
1     CDS
2     CDS
3     IGR
4  AS_IGR
5     IGR
                                                                                                                                                                                       rest
1                                                                                                                                                                                     b2743
2                                                                                                                                                                                     b2764
3 (CDS,b1594,mlc,glucosamine_anaerobic_growth_regulon_transcriptional_repressor3B_autorepressor,cds1581,-,1220/CDS,b1595,ynfL,LysR_family_putative_transcriptional_regulator,cds1582,-,893)
4                                                         (CDS,b0008,talB,transaldolase_B,cds7,+,953/CDS,b0009,mog,molybdochelatase_incorporating_molybdenum_into_molybdopterin,cds8,+,587)
5                                       (CDS,b1808,yoaA,putative_ATP-dependent_helicase2C_DinG_family,cds1798,-,1910/CDS,b1809,yoaB,putative_reactive_intermediate_deaminase,cds1799,+,344)
                                                                                                                                                                                                     GeneidBackup
1                                                                                                                CDS:b2743:pcm:L-isoaspartate_protein_carboxylmethyltransferase_type_II:cds2705:-:626:NC_000913.3
2                                                                                                                      CDS:b2764:cysJ:sulfite_reductase2C_alpha_subunit2C_flavoprotein:cds2726:-:1799:NC_000913.3
3 IGR:(CDS,b1594,mlc,glucosamine_anaerobic_growth_regulon_transcriptional_repressor3B_autorepressor,cds1581,-,1220/CDS,b1595,ynfL,LysR_family_putative_transcriptional_regulator,cds1582,-,893):+:945:NC_000913.3
4                                                      AS_IGR:(CDS,b0008,talB,transaldolase_B,cds7,+,953/CDS,b0009,mog,molybdochelatase_incorporating_molybdenum_into_molybdopterin,cds8,+,587):+:639:NC_000913.3
5                                       IGR:(CDS,b1808,yoaA,putative_ATP-dependent_helicase2C_DinG_family,cds1798,-,1910/CDS,b1809,yoaB,putative_reactive_intermediate_deaminase,cds1799,+,344):+:396:NC_000913.3

We keep only the IGR and AS_IGR strings, and we separate the two bookends. Note, the separation comes at the backslash.

igr <- allCounts |> filter(feature %in% c("IGR", "AS_IGR"))
igr <- igr |> tidyr::separate(GeneidBackup, c("Geneid1", "Geneid2"), sep = "[/]")
names(igr)
[1] "feature" "rest"    "Geneid1" "Geneid2"
igr
  feature
1     IGR
2  AS_IGR
3     IGR
                                                                                                                                                                                       rest
1 (CDS,b1594,mlc,glucosamine_anaerobic_growth_regulon_transcriptional_repressor3B_autorepressor,cds1581,-,1220/CDS,b1595,ynfL,LysR_family_putative_transcriptional_regulator,cds1582,-,893)
2                                                         (CDS,b0008,talB,transaldolase_B,cds7,+,953/CDS,b0009,mog,molybdochelatase_incorporating_molybdenum_into_molybdopterin,cds8,+,587)
3                                       (CDS,b1808,yoaA,putative_ATP-dependent_helicase2C_DinG_family,cds1798,-,1910/CDS,b1809,yoaB,putative_reactive_intermediate_deaminase,cds1799,+,344)
                                                                                                           Geneid1
1 IGR:(CDS,b1594,mlc,glucosamine_anaerobic_growth_regulon_transcriptional_repressor3B_autorepressor,cds1581,-,1220
2                                                                AS_IGR:(CDS,b0008,talB,transaldolase_B,cds7,+,953
3                                 IGR:(CDS,b1808,yoaA,putative_ATP-dependent_helicase2C_DinG_family,cds1798,-,1910
                                                                                                   Geneid2
1           CDS,b1595,ynfL,LysR_family_putative_transcriptional_regulator,cds1582,-,893):+:945:NC_000913.3
2 CDS,b0009,mog,molybdochelatase_incorporating_molybdenum_into_molybdopterin,cds8,+,587):+:639:NC_000913.3
3                 CDS,b1809,yoaB,putative_reactive_intermediate_deaminase,cds1799,+,344):+:396:NC_000913.3

For each of the two bookend Genes, we need to separate out the feature from the rest. Note that we write over feature1 in the second line of code below. Both of the bookends for all sequences are CDS elements.

igr$feature1 <- tidyr::separate(igr, Geneid1, c("feature1", "rest"), sep = "[,]")$feature1
igr$feature1 <- tidyr::separate(igr, feature1, c("rest", "feature1"), sep = "[()]")$feature1
igr$feature2 <- tidyr::separate(igr, Geneid2, c("feature2", "rest"), sep = "[,]")$feature2
names(igr)
[1] "feature"  "rest"     "Geneid1"  "Geneid2"  "feature1" "feature2"
igr
  feature
1     IGR
2  AS_IGR
3     IGR
                                                                                                                                                                                       rest
1 (CDS,b1594,mlc,glucosamine_anaerobic_growth_regulon_transcriptional_repressor3B_autorepressor,cds1581,-,1220/CDS,b1595,ynfL,LysR_family_putative_transcriptional_regulator,cds1582,-,893)
2                                                         (CDS,b0008,talB,transaldolase_B,cds7,+,953/CDS,b0009,mog,molybdochelatase_incorporating_molybdenum_into_molybdopterin,cds8,+,587)
3                                       (CDS,b1808,yoaA,putative_ATP-dependent_helicase2C_DinG_family,cds1798,-,1910/CDS,b1809,yoaB,putative_reactive_intermediate_deaminase,cds1799,+,344)
                                                                                                           Geneid1
1 IGR:(CDS,b1594,mlc,glucosamine_anaerobic_growth_regulon_transcriptional_repressor3B_autorepressor,cds1581,-,1220
2                                                                AS_IGR:(CDS,b0008,talB,transaldolase_B,cds7,+,953
3                                 IGR:(CDS,b1808,yoaA,putative_ATP-dependent_helicase2C_DinG_family,cds1798,-,1910
                                                                                                   Geneid2
1           CDS,b1595,ynfL,LysR_family_putative_transcriptional_regulator,cds1582,-,893):+:945:NC_000913.3
2 CDS,b0009,mog,molybdochelatase_incorporating_molybdenum_into_molybdopterin,cds8,+,587):+:639:NC_000913.3
3                 CDS,b1809,yoaB,putative_reactive_intermediate_deaminase,cds1799,+,344):+:396:NC_000913.3
  feature1 feature2
1      CDS      CDS
2      CDS      CDS
3      CDS      CDS

As CDS, it is now important to find the actual genenames for each of the IGR sequences. We also keep each element’s bnum which represents a unique gene identifier in E. coli.

bnum, genename, rna.name act as place holders for the types of elements that we will need to identify the bookends of the IGRs.

bnum = "b[0-9]{4}"
bnum
[1] "b[0-9]{4}"
genename = ",[a-z]{3}[A-Z,]."
rna.name = ",rna[0-9].."
igr$start.gene <- dplyr::case_when(
  igr$feature1 == "CDS" ~ stringr::str_extract(igr$Geneid1, genename),
  TRUE ~ stringr::str_extract(igr$Geneid1, rna.name))
igr$end.gene <- dplyr::case_when(
  igr$feature2 == "CDS" ~ stringr::str_extract(igr$Geneid2, genename),
  TRUE ~ stringr::str_extract(igr$Geneid2, rna.name))
igr$start.bnum <- dplyr::case_when(
  igr$feature1 == "CDS" ~ stringr::str_extract(igr$Geneid1, bnum),
  TRUE ~ "none")
igr$end.bnum <- dplyr::case_when(
  igr$feature2 == "CDS" ~ stringr::str_extract(igr$Geneid2, bnum),
  TRUE ~ "none")
igr <- igr |> tidyr::separate(start.gene, into = c("comma", "start.gene"), sep = "[,]") |> 
  dplyr::select(-comma) |> 
  tidyr::separate(end.gene, into = c("comma", "end.gene"), sep = "[,]") |> 
  dplyr::select(-comma)
names(igr)
 [1] "feature"    "rest"       "Geneid1"    "Geneid2"    "feature1"  
 [6] "feature2"   "start.gene" "end.gene"   "start.bnum" "end.bnum"  
igr
  feature
1     IGR
2  AS_IGR
3     IGR
                                                                                                                                                                                       rest
1 (CDS,b1594,mlc,glucosamine_anaerobic_growth_regulon_transcriptional_repressor3B_autorepressor,cds1581,-,1220/CDS,b1595,ynfL,LysR_family_putative_transcriptional_regulator,cds1582,-,893)
2                                                         (CDS,b0008,talB,transaldolase_B,cds7,+,953/CDS,b0009,mog,molybdochelatase_incorporating_molybdenum_into_molybdopterin,cds8,+,587)
3                                       (CDS,b1808,yoaA,putative_ATP-dependent_helicase2C_DinG_family,cds1798,-,1910/CDS,b1809,yoaB,putative_reactive_intermediate_deaminase,cds1799,+,344)
                                                                                                           Geneid1
1 IGR:(CDS,b1594,mlc,glucosamine_anaerobic_growth_regulon_transcriptional_repressor3B_autorepressor,cds1581,-,1220
2                                                                AS_IGR:(CDS,b0008,talB,transaldolase_B,cds7,+,953
3                                 IGR:(CDS,b1808,yoaA,putative_ATP-dependent_helicase2C_DinG_family,cds1798,-,1910
                                                                                                   Geneid2
1           CDS,b1595,ynfL,LysR_family_putative_transcriptional_regulator,cds1582,-,893):+:945:NC_000913.3
2 CDS,b0009,mog,molybdochelatase_incorporating_molybdenum_into_molybdopterin,cds8,+,587):+:639:NC_000913.3
3                 CDS,b1809,yoaB,putative_reactive_intermediate_deaminase,cds1799,+,344):+:396:NC_000913.3
  feature1 feature2 start.gene end.gene start.bnum end.bnum
1      CDS      CDS        mlc     ynfL      b1594    b1595
2      CDS      CDS       talB      mog      b0008    b0009
3      CDS      CDS       yoaA     yoaB      b1808    b1809

8.4 Lookaround

A lookaround specifies a place in the regular expression that will anchor the string you’d like to match. There are four types of lookarounds: positive lookahead, positive lookbehind, negative lookahead, and negative lookbehind.

  • “x(?=y)” – positive lookahead (matches ‘x’ when it is followed by ‘y’)
  • “x(?!y)” – negative lookahead (matches ‘x’ when it is not followed by ‘y’)
  • “(?<=y)x” – positive lookbehind (matches ‘x’ when it is preceded by ‘y’)
  • “(?<!y)x” – negative lookbehind (matches ‘x’ when it is not preceded by ‘y’)

Note that the lookaround specifies a place in the string which means it does not return the details of the lookaround. Using lookarounds, you can test strings against patterns without including the lookaround pattern in the resulting match.

The four different lookaround options: positive and negative lookahead and lookbehind. Each lookaround provides an anchor for where to start the regular expression matching.

Figure 8.1: Image credit: Stefan Judis https://www.stefanjudis.com/blog/a-regular-expression-lookahead-lookbehind-cheat-sheet/

8.5 Example - Taskmaster

In the following example, we will wrangle some data scraped from the wiki site for the TV series, Taskmaster. We won’t cover the html scraping here, but I include the code for completeness.

Screenshot of the wiki page for the Taskmaster TV series.

Figure 8.2: Taskmaster Wiki https://taskmaster.fandom.com/wiki/Series_11

8.5.1 Scraping and wrangling Taskmaster

Goal: to scrape the Taskmaster wiki into a data frame including task, description, episode, episode name, air date, contestant, score, and series.4

results <- read_html("https://taskmaster.fandom.com/wiki/Series_11") |>
  html_element(".tmtable") |> 
  html_table() |>
  mutate(episode = ifelse(startsWith(Task, "Episode"), Task, NA)) |>
  fill(episode, .direction = "down") |>
  filter(!startsWith(Task, "Episode"), 
         !(Task %in% c("Total", "Grand Total"))) |>
  pivot_longer(cols = -c(Task, Description, episode),
               names_to = "contestant",
               values_to = "score") |>
  mutate(series = 11)
results |> 
  select(Task, Description, episode, contestant, score, series) |>
  head(10)
# A tibble: 10 × 6
  Task  Description                              episode contestant score series
  <chr> <chr>                                    <chr>   <chr>      <chr>  <dbl>
1 1     Prize: Best thing you can carry, but on… Episod… Charlotte… 1         11
2 1     Prize: Best thing you can carry, but on… Episod… Jamali Ma… 2         11
3 1     Prize: Best thing you can carry, but on… Episod… Lee Mack   4         11
4 1     Prize: Best thing you can carry, but on… Episod… Mike Wozn… 5         11
5 1     Prize: Best thing you can carry, but on… Episod… Sarah Ken… 3         11
6 2     Do the most impressive thing under the … Episod… Charlotte… 2         11
# ℹ 4 more rows

more succinct results

   Task  Description         episode   contestant score series
  1     Prize: Best thing…  Episode 1… Charlotte… 1         11
  1     Prize: Best thing…  Episode 1… Jamali Ma… 2         11
  1     Prize: Best thing…  Episode 1… Lee Mack   4         11
  1     Prize: Best thing…  Episode 1… Mike Wozn… 5         11
  1     Prize: Best thing…  Episode 1… Sarah Ken… 3         11
  2     Do the most…        Episode 1… Charlotte… 2         11
  2     Do the most…        Episode 1… Jamali Ma… 3[1]      11
  2     Do the most…        Episode 1… Lee Mack   3         11
  2     Do the most…        Episode 1… Mike Wozn… 5         11
  2     Do the most…        Episode 1… Sarah Ken… 4         11

Currently, the episode column contains entries like

"Episode 1: It's not your fault. (18 March 2021)"

8.5.2 Cleaning the score column

table(results$score)

   –    ✔    ✘    0    1    2    3 3[1] 3[2]    4 4[2]    5   DQ 
   7    1    1   11   37   42   48    1    3   50    1   55   13 

How should the scores be stored? What is the cleaning task?

Screenshot of the scores for each contestand on each task. Note that many of the scores have footnotes which are recorded in the results table from scraping the wiki.

Figure 8.3: Taskmaster Wiki https://taskmaster.fandom.com/wiki/Series_11

Extracting numeric information

Suppose we have the following string:

"3[1]"

And we want to extract just the number “3”:

str_extract("3[1]", "3")
[1] "3"

What if we don’t know which number to extract?

str_extract("3[1]", "\\d")
[1] "3"
str_extract("4[1]", "\\d")
[1] "4"
str_extract("10[1]", "\\d")
[1] "1"
str_extract("10[1]", "\\d+")
[1] "10"
str_extract("DQ", "\\d")
[1] NA

str_extract()

str_extract() is an R function in the stringr package which finds regular expressions in strings of text.

str_extract("My cat is 3 years old", "cat")
[1] "cat"
str_extract("My cat is 3 years old", "3")
[1] "3"

Matching multiple options

str_extract() returns the first match; str_extract_all() allows more than one match.

str_extract("My cat is 3 years old", "cat|dog")
[1] "cat"
str_extract("My dog is 10 years old", "cat|dog")
[1] "dog"
str_extract("My dog is 10 years old, my cat is 3 years old", 
            "cat|dog")
[1] "dog"
str_extract_all("My dog is 10 years old, my cat is 3 years old", 
                "cat|dog")
[[1]]
[1] "dog" "cat"

Matching groups of characters

What if I want to extract a number?

str_extract("My cat is 3 years old", "\\d")
[1] "3"

What will the result be for the following code?

str_extract("My dog is 10 years old", "\\d")
str_extract("My dog is 10 years old", "\\d")
[1] "1"

The + symbol in a regular expression means “repeated one or more times”

str_extract("My dog is 10 years old", "\\d+")
[1] "10"

Extracting from multiple strings

strings <- c("My cat is 3 years old", "My dog is 10 years old")
str_extract(strings, "\\d+")
[1] "3"  "10"

What if we have multiple instances across multiple strings? We need to be careful working with lists (instead of vectors).

strings <- c("My cat is 3 years old", "My dog is 10 years old")
str_extract(strings, "\\w+")
[1] "My" "My"
str_extract_all(strings, "\\w+")
[[1]]
[1] "My"    "cat"   "is"    "3"     "years" "old"  

[[2]]
[1] "My"    "dog"   "is"    "10"    "years" "old"  

8.6 Extracting episode information

Currently, the episode column contains entries like:

"Episode 2: The pie whisperer. (4 August 2015)"

How would I extract just the episode number?

str_extract("Episode 2: The pie whisperer. (4 August 2015)", "\\d+")
[1] "2"

How would I extract the episode name?

Goal: find a pattern to match: anything that starts with a :, ends with a .

Let’s break down that task into pieces.

How can we find the period at the end of the sentence? What does each of these lines of code return?

str_extract("Episode 2: The pie whisperer. (4 August 2015)", ".")
[1] "E"
str_extract("Episode 2: The pie whisperer. (4 August 2015)", ".+")
[1] "Episode 2: The pie whisperer. (4 August 2015)"

We use an escape character when we actually want to choose a period:

str_extract("Episode 2: The pie whisperer. (4 August 2015)", "\\.")
[1] "."

Recall the goal: find a pattern to match: anything that starts with a :, ends with a .

str_extract("Episode 2: The pie whisperer. (4 August 2015)", 
            ":.+\\.")
[1] ": The pie whisperer."

8.7 Lookaround (again)

8.7.1 Lookbehinds

(?<=) is a positive lookbehind. It is used to identify expressions which are preceded by a particular expression.

str_extract("Episode 2: The pie whisperer. (4 August 2015)", 
            "(?<=: ).+")
[1] "The pie whisperer. (4 August 2015)"
str_extract("Episode 2: The pie whisperer. (4 August 2015)", 
            "(?<=\\. ).+")
[1] "(4 August 2015)"

8.7.2 Lookaheads

(?=) is a positive lookahead. It is used to identify expressions which are followed by a particular expression.

str_extract("Episode 2: The pie whisperer. (4 August 2015)", 
            ".+(?=\\.)")
[1] "Episode 2: The pie whisperer"
str_extract("Episode 2: The pie whisperer. (4 August 2015)", 
            ".+(?=:)")
[1] "Episode 2"

Extracting episode information

Getting everything between the : and the .

str_extract("Episode 2: The pie whisperer. (4 August 2015)", 
            "(?<=: ).+(?=\\.)")
[1] "The pie whisperer"

Extracting air date

I want to extract just the air date. What pattern do I want to match?

str_extract("Episode 2: The pie whisperer. (4 August 2015)", ...)
str_extract("Episode 2: The pie whisperer. (4 August 2015)", 
            "(?<=\\().+(?=\\))")
[1] "4 August 2015"

Wrangling the episode info

Currently:

# A tibble: 270 × 1
  episode                                        
  <chr>                                          
1 Episode 1: It's not your fault. (18 March 2021)
2 Episode 1: It's not your fault. (18 March 2021)
3 Episode 1: It's not your fault. (18 March 2021)
4 Episode 1: It's not your fault. (18 March 2021)
5 Episode 1: It's not your fault. (18 March 2021)
6 Episode 1: It's not your fault. (18 March 2021)
# ℹ 264 more rows

One option:

results |>
  select(episode) |>
  mutate(episode_name = str_extract(episode, "(?<=: ).+(?=\\.)"),
         air_date = str_extract(episode, "(?<=\\().+(?=\\))"),
         episode = str_extract(episode, "\\d+"))
# A tibble: 270 × 3
  episode episode_name        air_date     
  <chr>   <chr>               <chr>        
1 1       It's not your fault 18 March 2021
2 1       It's not your fault 18 March 2021
3 1       It's not your fault 18 March 2021
4 1       It's not your fault 18 March 2021
5 1       It's not your fault 18 March 2021
6 1       It's not your fault 18 March 2021
# ℹ 264 more rows

Another option:

results |>
  separate_wider_regex(episode, 
                       patterns = c(".+ ", 
                                    episode = "\\d+", 
                                    ": ", 
                                    episode_name = ".+", 
                                    "\\. \\(", 
                                    air_date = ".+", 
                                    "\\)"))
# A tibble: 270 × 3
  episode episode_name        air_date     
  <chr>   <chr>               <chr>        
1 1       It's not your fault 18 March 2021
2 1       It's not your fault 18 March 2021
3 1       It's not your fault 18 March 2021
4 1       It's not your fault 18 March 2021
5 1       It's not your fault 18 March 2021
6 1       It's not your fault 18 March 2021
# ℹ 264 more rows

8.8 Regular expressions and SQL

Back to the IMDb database…

SELECT production_year, title
  FROM title
  WHERE kind_id = 1 AND
        title REGEXP '(?i)star'
  LIMIT 0, 20;
Displaying records 1 - 10
production_year title
2005 "Dancing with the Stars" (I)
2005 "Dancing with the Stars" (II)
2005 "Dancing with the Stars" (III)
2017 "Girl Starter" (II)
2001 "Popstars" (I)
2001 "Popstars" (II)
2002 "Popstars" (I)
2000 "Popstars" (I)
1959 "Startime" (II)
1959 "Startime" (I)

8.9 Reflection questions

  1. What is the difference between [a|b] and (a|b)?

  2. What is the main character which needs to be escaped inside [...]? Why?

  3. Why do we use lookarounds instead of just putting the location of interest inside our regular expression pattern?

  4. What are the differences between *, +, and ? ? How do the three metacharacters apply to a single character or a group of characters?

  5. How can you find a string between two patterns without picking up the bookending patterns themselves?

  6. Why does it make sense to write the regular expression pattern that matches the entire string of interest and not just a pattern which evaluates to TRUE?

8.10 Ethics considerations

  1. How can we use regular expressions to check for name mispellings or other similar data cleaning tasks?

  2. Name one thing that you noticed in the course materials (either in class or reading the notes, etc.) where you thought to yourself “Oh, I’ll have to be really careful about that.” Why would you need to be careful?


  1. \d\d.\d\d.\d\d will work, but it will also match 123456. It is better to replace the dot with the characters of interest: \d\d[/.\-]\d\d[/.\-]\d\d. Remember that a dot inside a character class is just a dot. ↩︎

  2. ^(1[012]|[1-9]):[0-5][0-9] (am|pm)$↩︎

  3. In the former, the regex will search for \bMary or Jane or Sue\b. In the latter, the regex will search for \bMary\b or \bJane\b or \bSue\b. That is, Janet will match the former but not the latter.↩︎

  4. Thanks to Ciaran Evans at Wake Forest University for example and code, https://sta279-f23.github.io/↩︎